The 10" 5/8" Tube Support for Outer Wall to Floor Pole is a wall connector component that secures the outer pole of a wall-to-floor tube display installation to the wall surface. At 10-5/8" in length, it is the longest tube support in the wall-to-floor lineup — suited specifically to the outer pole position where the greatest wall projection depth is required. The system is finished in silver anodized aluminum. Retailers building or maintaining a wall-to-floor tube display with an outer pole configuration consistently rely on this support connector for proper outer pole alignment.
Why retailers use the 10 5/8 Inch Tube Support Outer Wall to Floor Pole Tube Display in their installations
A wall-to-floor tube display with multiple pole positions requires each pole to connect to the wall at the correct projection depth for its specific position. However, the outer pole sits furthest from the wall — and requires the longest connector of the three support sizes to reach its wall fixing point at the correct depth. Because this 10-5/8" support is designed specifically for the outer wall-to-floor pole, it bridges the gap between the wall surface and the outer pole position without the connector under-reaching and leaving the pole unsupported at the wall connection point. Furthermore, the 10-5/8" length gives the outer pole connection the most wall contact of any support in the lineup — improving stability at the wall fixing point under the full weight load of the outrigger display. As a result, the outer pole stays properly vertical and aligned through daily retail use and seasonal resets. The silver anodized aluminum finish matches all tube display hardware cleanly.
Retailers building a wall-to-floor tube display with both inner and outer pole positions find this 10-5/8" support the correct outer pole connector that completes the full three-support alignment setup alongside the 2⅜" and 6-11/16" versions. Moreover, stores replacing a worn outer pole wall connector on an existing wall-to-floor tube display also rely on it. Consequently, it suits any wall-to-floor tube display build where the outer pole requires its own dedicated wall connection point at the correct projection depth. Used in combination with PS14AN, PS13AN, and AS379ST. Material: aluminum anodized, silver finish.
Specifications
- Length: 10-5/8"
- Type: Tube wall support connector — outer pole
- Compatible setting: Wall-to-floor
- Pole position: Outer pole
- Used in combination with: PS14AN, PS13AN, AS379ST
- Finish: Silver
- Material: Aluminum anodized
- Ideal for: Wall-to-floor tube display outer pole installations, alignment hardware
Complete Your Display
Browse the full Tube Display System — wall mounted kits, ceiling-to-floor configurations, and tube display components — to complete your store build. Trusted by boutiques and national retail brands. Expert support available at (800) 420-1457.
