A double bar rack with a V-brace gives retail clothing stores two full-length hangrails in a single floor fixture footprint. This chrome rack measures 60"L x 22"W with 1-1/4" round tubing hangrails that adjust from 49" to 70" in 3" increments. The center V-brace reinforces the frame for heavier garment loads. Adjustable levelers are included. Learn more about garment rack construction and how double bar racks maximize hanging capacity on the retail floor.
Running two bars on one rack doubles the hanging capacity without doubling the floor space. Set both bars at the same height for uniform garment lengths, or stagger them — one higher, one lower — to accommodate different product types on the same fixture. Holes are pre-drilled in both hangrails for swedged stem signholders, so category labels and promotional signs mount directly to the rack. Browse the full Rolling Racks collection for all compatible accessories. Call (800) 420-1457 to confirm caster compatibility for your floor type. Order Today.
V-Brace Center Support for Heavy Garment Loads
The reinforcing V-brace sits in the center of the rack between the two uprights. It keeps the frame from racking or twisting under load — especially important when both hangrails are fully loaded with heavy outerwear, denim, or suits. Standard double bar racks without a center brace can flex when weight is unevenly distributed. The V-brace eliminates that flex and keeps the rack square on the floor.
Adjustable levelers on the base let you compensate for uneven flooring without shimming. This is particularly useful in older retail spaces, showrooms, or event venues where floors are not perfectly flat. The teardrop end caps on both hangrails are designed to accept KH1 add-on hangrails, which connect between two racks to create a third parallel bar.
Expandable with Add-On Accessories
This double bar rack is built to expand. Add KH1 rails between two racks for a third bar. Use KH2 rails to add a second double rack on top of the base. Attach a WRT40 grid basket topper for folded or packaged merchandise above the hanging section. Casters are available separately — use specialty caster kit ACT4041SET, which includes the additional hardware needed for twin-wheel casters to fit the legs of this rack correctly.
Double Bar Rack | Specifications
| Feature |
Details |
| Length |
60" |
| Width |
22" |
| Height Range |
49"–70" (adjustable every 3") |
| Hangrail Tubing |
1-1/4" round tubing |
| Finish |
Chrome |
| Center Brace |
V-brace included |
| Levelers |
Adjustable levelers included |
| Sign Compatibility |
Pre-drilled for swedged stem signholders |
| Casters |
Sold separately (ACT4041SET kit required) |
Frequently Asked Questions
Can I set the two bars at different heights on this double bar rack?
Yes. Each hangrail adjusts independently every 3" between 49" and 70". Run them parallel at the same height for uniform garments, or set them at different heights to accommodate short and long items on the same rack.
Do casters come included with this rack?
No. Casters are sold separately. Use specialty caster kit ACT4041SET, which includes the additional hardware needed for twin-wheel casters to fit the legs of this specific rack correctly.
