The Cherry Ledgetop Counter SW is a 48-inch warm cherry service counter with a slatwall front panel built into the customer-facing side. The cherry melamine top is 48 inches wide, 22 inches deep, and 42 inches tall. The slatwall front accepts standard slatwall hooks, faceouts, and shelf brackets — turning the front face of the counter into an active display zone. An easy roll drawer and an adjustable rear storage shelf keep the working area organized. Ships knocked down. Professional assembly available.
Cherry Ledgetop Counter SW | Service Counter With a Slatwall Front
A standard ledgetop counter has a flat panel front. This one has slatwall. The front face accepts any standard slatwall accessory — hooks, faceouts, shelf brackets, and hangrails all insert directly into the horizontal channels. No drilling, no extra hardware. The cherry melamine top and sides maintain the warm wood-grain finish on every visible surface. The slatwall front runs the full width of the counter below the top surface. Staff work at the same warm cherry counter. Customers approaching the checkout position see hanging merchandise on the front panel before they reach the transaction zone.
The Slatwall Front Panel — A Third Display Zone at the Counter
Most service counters use two display surfaces — the working top and the raised rear ledge. The SW version adds a third. The slatwall front panel gives you a customer-facing display zone at the checkout position. Load it with impulse accessories, featured small goods, or seasonal items on standard slatwall hooks. Customers browsing and waiting at the counter see the front panel display. This captures attention at the point of highest customer engagement in the store — the checkout position — without giving up any counter top or rear ledge space.
Raised Rear Ledge — Impulse Display Above the Transaction Zone
The raised rear check writing ledge sits above the main 22-inch working surface at the back of the counter. It runs the full 48-inch width. Use it for impulse items, a tablet stand, a small featured product display, or seasonal goods. The ledge surface is cherry melamine — the same warm finish as the top and sides. It reads as part of the counter rather than a separate display fixture. Gift shops and boutiques use the ledge for small packaged goods and featured seasonal items that customers see and add to their purchase at the register.
3/4-Inch Cherry Construction Throughout
The top, sides, and lower panel are all 3/4-inch board construction in cherry melamine laminate. Edge banding runs the full perimeter of every exposed edge. The easy roll drawer handles cash supplies, transaction materials, and small items that need to stay accessible but off the working surface. The adjustable rear storage shelf gives staff a dedicated back-counter zone for bags, supplies, and reserve stock. Every visible surface — top, sides, ledge, and drawer front — maintains the cherry finish throughout.
Cherry Ledgetop Counter SW | Specifications
| Specifications |
Details |
| Dimensions |
48"W x 22"D (top) x 42"H |
| Front Panel |
Slatwall — accepts standard slatwall accessories |
| Ledge |
Raised rear check writing ledge — full width |
| Drawer |
Easy roll front drawer |
| Storage |
Adjustable rear storage shelf |
| Construction |
3/4" top, sides, and lower panel |
| Finish |
Cherry melamine laminate |
| Ships |
Knocked down (flat-packed) |
| Assembly |
Self-assembly included / Professional assembly available |
| SKU |
SC-LTCSW4C |
Complete Your Cherry Counter Layout
The Cherry Ledgetop Counter SW connects with every unit in our Cherry Counters & Cases lineup. Pair it alongside a cherry 70-inch full view showcase for a matched cherry counter run with showcase and slatwall service counter side by side. For a standard ledgetop without a slatwall front, see our cherry 48-inch ledgetop counter. Browse our slatwall accessories for hooks, faceouts, and shelf brackets to outfit the front panel.
Questions or need a bulk quote? Call (800) 420-1457 or request free samples using the form on this page.
Frequently Asked Questions
What is the slatwall front panel on the Cherry Ledgetop Counter SW?
The front face of the counter is a slatwall panel with horizontal channels that accept standard slatwall accessories. Hooks, faceouts, shelf brackets, and hangrails all insert directly into the channels. This turns the customer-facing side of the counter into a live display zone for impulse goods and featured accessories at the checkout position.
How does the SW version differ from the standard cherry ledgetop counter?
The standard cherry ledgetop has a plain panel front with no display function. The SW version replaces the plain front with a slatwall panel. Both units are 48 inches wide with the same cherry melamine top, raised rear ledge, easy roll drawer, and adjustable rear storage shelf. The SW adds a front-panel display zone that the standard version does not have.
What slatwall accessories work on the front panel?
Any standard slatwall accessory fits the front panel channels — hooks, faceouts, shelf brackets, and hangrails all attach without additional hardware. Four-inch slatwall hooks are a common starting point for hanging small accessories and packaged goods at the checkout position. Browse our slatwall accessories section for the full range of compatible hardware.
What stores benefit most from the slatwall front counter?
Gift shops, boutiques, cannabis retailers, and vape stores all use this counter when they need active display space at the checkout position. The slatwall front holds impulse accessories, small packaged goods, and featured items at eye level where customers are already stopping to pay. Any store that sells small add-on items benefits from the front panel display zone.
Is professional assembly recommended?
Professional assembly is available and recommended for a clean, square build. The unit ships knocked down with all hardware and assembly instructions included. Select the assembly option at checkout and the counter arrives fully built and ready to place.
