This heavy weight slotted standard mounts to a wall and holds shelves, hangrail, and faceouts at any slot height. It uses 3/32" metal, 1/2" slots on 1" centers, and a satin zinc finish. Choose 48", 60", 72", 84", or 96" lengths from the dropdown. Also sold as the Econoco President Line heavy weight standard with identical specifications.
Heavy Weight Wall Standard Built for Demanding Retail Loads
Each upright measures 3/32" thick, about 50% thicker than medium weight versions. Thicker steel resists bending during installation and daily use. It supports giftware, folded denim, shoes, and boxed goods. Mount it on wall studs for maximum support. Countersunk holes sit 9" apart, so screw heads stay flush with the surface.
Slotted Standard Layouts for Shelves and Hangrail
The slot pattern accepts President Line shelf brackets, hangrail brackets, and faceout arms. Set each accessory by counting slots. No tape measure is needed. Move accessories up or down as your displays change. Space uprights 24" apart to support wide shelves.
Heavy-Duty Slotted Upright Lengths for Every Wall Height
Match the length to your wall height. A 96" upright suits full-height displays. Shorter lengths fit half-wall shelving, counters, and cash wrap areas. Fixture weight runs from 1.5 lbs at 48" to 2.9 lbs at 96".
Retail Wall Standard Uses in Boutiques and Gift Shops
Boutiques, gift shops, hardware stores, and shoe departments all use this wall system. Strong wall fixtures support good visual merchandising because shelves and hangrail move easily. Heavier merchandise needs stronger support than light apparel. Pair the upright with glass, wood, or bullnose shelves for a clean wall display.
Heavy Weight Slotted Standard | Specifications
- Length Options
- 48", 60", 72", 84", 96"
- Slot Size
- 1/2" slots on 1" centers
- Slot Style
- Single slotted, surface mount
- Finish
- Satin zinc
- Material
- Metal
- Thickness
- 3/32"
- Width
- 11/16"
- Depth
- 13/32"
- Screw Hole Spacing
- 9" apart — countersunk
- Weight
- 1.5 lbs (48") to 2.9 lbs (96")
Heavy-Duty Slotted Standard Questions Answered
How does a heavy weight wall standard differ from medium weight?
Heavy weight standards use 3/32" steel. Medium weight versions use 1/16" steel. Both share 1/2" slots on 1" centers, so the same President Line brackets fit either one.
Can I mount a heavy-duty slotted upright on drywall?
Yes. Attach each upright to wall studs for the strongest hold. Use rated drywall anchors where studs do not line up with your layout.
Which shelves fit this slotted standard?
Glass, wood, and bullnose shelves all work with matching brackets. Add shelf rests and rubber bumpers when you install glass shelves.
Need help planning your wall standard layout? Call (800) 420-1457. Browse all components in our standards collection.
