Everything else on your gridwall display is visible — the panels, the hooks, the baskets. Grid Panel Connectors are the part customers never see. They clip between panel wires at connection points, hold panels together under a full merchandise load, and keep your entire display locked in position. Black, white, and chrome.
Gridwall Joining Clips | The Hardware That Holds Your Display Together
Grid panel connectors clip onto the wire grid at the point where two panels meet. Each connector spans the gap between panels and locks the adjacent wires together, so the joint between panels stays tight and stable. Without connectors, freestanding grid displays shift at the joins under merchandise weight and customer interaction. With connectors in place, the panels behave as a single rigid unit. Use them wherever two panels connect — side by side in a wall run, at angles in a floor display, or at the base where panels attach to a gondola, triangle, or pinwheel base.
When You Need Grid Panel Connectors
Any time two or more grid panels connect, connectors are needed. Freestanding floor displays built on gondola bases, triangle bases, and pinwheel bases also require connectors to secure each panel to the base frame and to hold adjacent panels together along their shared edges. Connecting multiple panels side by side in a wall run — whether wall-mounted or freestanding — uses connectors along the vertical join between each pair of panels. Since connectors are also required for stability in any multi-panel configuration, keeping a supply on hand means your display is always ready to expand or reconfigure.
How Many Connectors Per Display Setup
The number of connectors needed depends on panel height and the number of joins in your setup. For a single panel-to-panel join on a standard 2x6 panel, plan for six to nine connectors spaced evenly down the 72-inch shared edge — roughly one connector every 8 to 12 inches. A gondola base setup with four panels typically requires nine connectors. A triangle base with three panels needs six to nine. A pinwheel base with four panels in a cross formation also requires connectors at each base attachment point and along any panel-to-panel contact edges. Ordering extra keeps a spare supply ready for future builds.
Black, White, or Chrome | Match Your Panel Finish
Connectors are small and stay hidden between panels, but matching the connector color to your panel finish gives the display a cleaner look at the join lines. Black connectors disappear into black panels. White connectors blend with white setups. Chrome connectors pair with chrome or mixed-finish displays. All three colors are available at the same price so you can match your current panel setup without extra cost.
Grid Panel Connectors | Specifications
| Specifications |
Details |
| Colors |
Black, White, Chrome |
| Compatible With |
Standard gridwall panels and slatgrid panels |
| Used For |
Panel-to-panel joins, panel-to-base connections |
| Sold |
Individually |
Order Connectors With Your Bases and Panels
Grid Panel Connectors are the essential hardware for any multi-panel gridwall build. Order them alongside your gridwall panels, gondola base, triangle base, or pinwheel base to have everything you need for a complete display setup. Browse our gridwall accessories for hooks, baskets, shelf brackets, and hangrails to load out your display once the panels are connected.
Questions or need a bulk quote? Call (800) 420-1457 or use the quote form on this page.
Frequently Asked Questions
What are Grid Panel Connectors used for?
Grid Panel Connectors join gridwall panels together at connection points. They are used wherever two panels meet — side by side in a wall run, at angles in a floor display, or where panels attach to a gondola, triangle, or pinwheel base. Without connectors, the join between panels shifts under load. With connectors, the panels lock together as a single stable unit.
How many connectors do I need per display setup?
For a single panel-to-panel join on a standard 6-foot panel, plan for six to nine connectors spaced evenly down the shared edge. A gondola base with four panels typically requires nine connectors. A triangle base with three panels needs six to nine. Order extra since connectors are small and easy to misplace.
Are these the same joining clips mentioned with gridwall bases?
Yes. The Grid Panel Connectors on this page are the joining clips referenced in the gondola base, triangle base, and pinwheel base product descriptions. When those descriptions mention securing panels with joining clips, these are the connectors used.
Can I use zip ties instead of Grid Panel Connectors?
Yes. Black zip ties work as a low-cost alternative and are also mentioned in the base product descriptions as an option. Grid Panel Connectors give a cleaner, more finished appearance since they are designed specifically for gridwall wire connections and match the panel finish. Zip ties are a functional backup but are more visible at the join line.
Do Grid Panel Connectors work with slatgrid panels?
Yes. Grid Panel Connectors are compatible with both standard gridwall panels and slatgrid panels since both use the same wire grid structure at the panel edges. Use them to connect gridwall panels to gridwall panels, slatgrid to slatgrid, or gridwall to slatgrid in the same display setup.
