T-Legs for Grid Panels
A wall-mounted grid panel takes minutes to set up. The T-Legs for Grid Panels take a minute more. Slide one leg onto the bottom wire on each side of the panel and it stands on its own — stable, double-sided, and ready for merchandise. Any grid or slatgrid panel up to 8 feet tall becomes a freestanding floor display without tools, fasteners, or extra hardware. Available in black, white, and chrome. Sold in pairs.
Convert Any Panel to a Freestanding Floor Display
The T-legs slide directly onto the bottom horizontal wire of the panel, so no tools or screws are needed. Once both legs are in position, the panel stands on a 24-inch-wide base that gives it a stable, balanced footing on any flat floor surface. A fully loaded panel — filled with hooks, faceouts, shelves, and merchandise — stays upright since the wide base distributes the weight evenly. Retailers who already own grid panels gain a complete freestanding display unit for the cost of one pair of T-legs. The same panels they use on walls also move straight to the floor with no modifications.
Setup and Configuration Options
Each pair of T-legs supports one grid panel as a standalone double-sided floor unit. Customers shop both faces at once, so a single panel with two T-legs covers the same product-facing area as two separate wall-mounted sections. Join two or three T-leg panels together with joiner clamps to build a longer floor display run. For a display beside a mirror or dressing room, a single T-leg panel creates a natural product zone that keeps accessories within arm's reach of the customer.
Where Retailers Use T-Legs
Clothing boutiques use T-leg panels in the center floor to create seasonal featured displays that sit in the middle of the room rather than along the walls. Trade show exhibitors use them since the legs add no significant weight and the panel packs flat for transport. Gift shops position T-leg panels beside checkout counters to carry impulse items at eye level. Pop-up retailers also use them since the entire unit — one panel plus two T-legs — sets up and breaks down without any tools.
Finish Options — Black, White, or Chrome
Black legs read clean and sharp against most panel colors, so the base stays visually neutral while the merchandise takes focus. White legs match white panels for a seamless, low-profile look that suits gift shops, children's stores, and bright open retail spaces. Chrome gives the display a classic commercial finish that reads professional in any store environment and carries a small additional upcharge per leg.
T-Legs for Grid Panels Specifications
| Specifications | Details |
| Dimensions Per Leg | 24"W x 19.5"H |
| Material | Heavy-duty steel |
| Finish | Semi-gloss chip-resistant epoxy |
| Colors | Black, White, Chrome (+$2.00 per leg) |
| Weight Per Leg | 2.6 lbs |
| Compatible With | Grid and Slatgrid panels up to 8 feet tall |
| Sold In | Pairs — price shown is per pair (2 legs) |
Complete Your Freestanding Display
Every standard gridwall hook, shelf, faceout, basket, and hangrail fits the 3" on-center grid on any panel mounted on T-legs. Browse our complete range of gridwall accessories to stock your display. For a one-sided display with a tighter footprint, see our L-Legs for Grid Panels. For center-floor setups, pair multiple T-leg panels with joiner clamps to build a continuous display run.
Questions or need a bulk quote? Call (800) 420-1457 or use the quote form on this page.
Frequently Asked Questions
How do T-Legs attach to a grid panel?
Slide one T-leg onto the bottom horizontal wire on each side of the panel — no tools, no screws, no fasteners needed. The leg slot fits the standard grid wire, so it locks in place under the weight and load of the panel. Attach one leg to the bottom left and one to the bottom right, and the panel stands on its own.
Can I use T-Legs with any size grid panel?
Yes. T-Legs work with any standard grid or slatgrid panel up to 8 feet tall. The 24-inch-wide base gives taller panels the same stable footing as shorter ones since the wide stance balances the panel's center of gravity at any height.
What is the difference between T-Legs and a gondola base?
T-legs support one panel as a standalone floor unit — attach two legs to one panel and it stands independently. The gondola base supports four panels at once in a four-sided display. Choose T-legs when you need a single lightweight freestanding unit that sets up fast. Choose the gondola base when you need a high-capacity four-sided floor merchandiser for a fixed location.
Can I use T-Legs with Slatgrid panels?
Yes. T-Legs are compatible with both standard grid panels and slatgrid panels since the leg slot fits the same wire gauge across both panel types. Slatgrid panels on T-legs also accept both gridwall and slatwall accessories.
How many T-Legs do I need per panel?
You need two T-legs per panel — one for each side of the bottom edge. T-Legs are sold in pairs. Each pair creates one complete freestanding floor unit.
