Palo Rectangular Hangbar 24 or 48 Inch Anodized
This Palo rectangular hangbar slides into the Palo outrigger upright and creates a shoulder-out garment display bar at the chosen position on the wall system. Available in 24-inch and 48-inch lengths in anodized silver with a 1-3/8-inch diameter rectangular profile. The slide-in installation needs no tools — the bar drops into the Palo bracket and locks in place ready to load immediately.
Palo Rectangular Hangbar | Specifications
- Available Lengths
- 24 inches or 48 inches
- Diameter
- 1-3/8 inches
- Profile
- Rectangular tubing
- Finish
- Anodized silver
- Installation
- Slide-in — tool-free, drops into Palo upright bracket
- Display Method
- Shoulder-out garment display
- Compatible System
- Palo outrigger system only
- Small Order Note
- Orders under $100 in the Palo series carry a $15 small order fee
Palo Rectangular Hangbar — Slide-In Installation on the Palo Upright
The Palo system uses a slide-in bracket design across all its arm and hangbar accessories. The rectangular hangbar slides into the Palo upright's bracket slot from above and locks at the chosen height position. No screws, no tools, and no installation time beyond the slide. The bar is secure under garment load immediately after insertion. Staff reposition it by lifting clear of the bracket and sliding in at a new height position. That repositioning takes seconds and needs no tools at any stage.
The slide-in mechanism is one of the defining advantages of the Palo system over bolt-fixed wall display alternatives. Retailers who change their wall display layouts between collections, seasons, or promotional cycles do so without tools and without downtime. The hangbar moves, the display resets, and the wall system serves the next layout configuration without any modification to the upright or the wall mounting.
24-Inch vs 48-Inch — Choosing the Right Hangbar Length
The 24-inch hangbar suits compact wall sections and outrigger positions where a shorter garment run is the priority. A 24-inch bar holds approximately 8 to 12 garments depending on hanger width and garment density. It works well in small boutique wall systems, single-panel sections, and positions where the wall run does not extend to a full 48-inch bay width.
The 48-inch hangbar doubles the garment capacity in the same outrigger position. It suits full-width wall bays, high-volume garment sections, and any position where maximizing the number of shoulder-out garments per wall run matters. Furthermore, the 48-inch length matches the standard 4-foot wall bay width used in most retail wall display configurations. That alignment makes the 48-inch version the most practical choice for stores with a standard bay-width wall layout and high garment density requirements per wall section.
Rectangular Profile — Load Strength and Accessory Compatibility
The rectangular tubing profile of this hangbar delivers two advantages over a round tube equivalent. First, the flat upper surface of rectangular tubing accepts saddle-mount accessories — hooks, saddle faceouts, and other flat-seating accessories that require a non-round bar surface to seat correctly. A round tube hangbar accepts garment hangers only. A rectangular tube hangbar accepts garment hangers and saddle-mount accessories at any position along the bar. Second, the 1-3/8-inch diameter gives the bar a heavier body than the 3/4-inch round tube used on the Palo round tube faceout — adding load capacity for heavier garment types like coats, structured jackets, and denim across the full bar length.
The anodized silver finish matches all other Palo system components. The anodized surface is harder and more wear-resistant than chrome plating. It holds its finish under daily garment loading and unloading without chipping or dulling at the contact points where hangers slide along the bar. Learn more about how retail wall display systems use modular outrigger arms and hangbars to create configurable, high-density garment display across boutique and apparel retail wall layouts.
Frequently Asked Questions
What is the difference between the Palo rectangular hangbar and the Palo round tube faceout?
The Palo rectangular hangbar is a shoulder-out garment display bar — hangers slide onto the bar and garments hang with the shoulder facing the customer. The Palo round tube faceout is a double-sided face-out arm — one garment faces forward on each side of the arm. Choose the rectangular hangbar for high-capacity shoulder-out garment sections. Choose the round tube faceout for featured face-out presentations where the garment's front needs to face the customer directly.
Which length should I choose — 24 or 48 inches?
Choose 24 inches for compact wall sections, small boutique layouts, or positions where the wall run does not need full 4-foot bay coverage. Choose 48 inches for full-width wall bays where maximum garment capacity per wall section is the priority. The 48-inch version adds $10.00 to the base price and holds approximately double the garments of the 24-inch at the same wall position. Most retailers stocking a full garment wall section choose the 48-inch as the standard for primary display positions and the 24-inch for end-cap or accent positions.
Does the Palo rectangular hangbar work with standard retail hangers?
Yes. The 1-3/8-inch diameter rectangular bar accepts all standard retail hanger hook openings — plastic, wood, and metal hangers all slide onto the bar without modification. The rectangular profile also allows hangers to slide freely along the bar during restocking. Staff push hangers along the bar to create space for new stock without lifting each one individually off the bar.
Need help configuring a Palo wall system or choosing between the 24 and 48-inch hangbar lengths? Call (800) 420-1457. Browse the full range in our Palo system section.
