Every gridwall panel needs a wall to hang on. Gridwall Hanging Brackets are the hardware that makes it happen. Mount four brackets to any wall surface, hook the panel wire onto each bracket, and the panel sits 2 inches out from the wall — giving hooks, faceouts, and shelf brackets full clearance behind the display. Black, white, chrome, and raw steel.
Gridwall Wall Mount Brackets | Four Per Panel, One at Each Corner
Each bracket attaches to the wall at a single screw point. The panel wire hooks into the bracket arm, and the bracket holds the panel at a fixed 2-inch standoff from the wall surface. Mount one bracket at each corner of the panel — top left, top right, bottom left, bottom right — for a stable, level installation across the full panel face. Since the bracket position at each corner distributes the panel weight evenly, the display stays level under a full load of hooks, baskets, and merchandise.
How Gridwall Hanging Brackets Work
The installation sequence is straightforward. Mark the bracket positions on the wall at each panel corner, drill or screw each bracket into the wall, and then hang the panel by hooking the corner wires onto each bracket arm. No extra fasteners or tools are needed after the brackets are in place. The panel clips on and off the brackets, so you can remove and reposition it without uninstalling the hardware. For stud walls, screw directly into the stud for maximum hold. On drywall without studs, use appropriate wall anchors rated for the panel and merchandise weight.
The 2-Inch Gap — Why It Matters for Your Display
The bracket arm holds the panel 2 inches away from the wall surface. This gap is what makes gridwall wall display work. Without it, the tails of hooks and the arms of faceouts would contact the wall and the panel couldn't hold them. With 2 inches of clearance, hook tails, faceout arms, and shelf bracket hooks all fit cleanly behind the panel face. The gap also allows the lower wire of the panel to clear baseboard trim and wall molding in most retail environments, since the panel floats above the wall surface rather than pressing flat against it.
Four Finish Options Including Raw Steel
Black brackets disappear against dark-painted walls and match black panel finishes for a clean, consistent look. White brackets blend with white walls and white panel setups. Chrome gives a neutral commercial finish that works with any panel color under both warm and cool retail lighting. Raw steel is the industrial option — an uncoated steel finish that suits raw aesthetic stores, outdoor equipment retailers, and workshop-themed spaces. Raw steel is available at an upcharge per bracket. All four finishes are available at the same bracket design and dimensions, so you can mix finishes across different panel zones in the same store.
Gridwall Hanging Brackets | Specifications
| Specifications |
Details |
| Colors |
Black, White, Chrome, Raw Steel |
| Recommended Per Panel |
4 brackets — one at each corner |
| Panel Standoff |
2 inches from wall |
| Compatible With |
Standard gridwall panels and slatgrid panels |
| Wall Types |
Stud walls, drywall with anchors, concrete with appropriate fasteners |
| Sold |
Individually |
Order Brackets With Your Gridwall Panels
Order four brackets per gridwall panel to have everything you need for a complete wall installation. For a three-panel wall run, that's 12 brackets. For a six-panel perimeter, plan for 24. Since brackets are sold individually, you can order the exact quantity your layout requires. Browse our gridwall panels to select your panel size, and see our gridwall accessories for hooks, baskets, and hangrails to outfit the display once it's mounted.
Questions or need a bulk quote? Call (800) 420-1457 or use the quote form on this page.
Frequently Asked Questions
How many Gridwall Hanging Brackets do I need per panel?
Four brackets per panel — one at each corner. This gives the panel a stable, level mount with weight distributed across all four corners. For very tall panels such as the 2x7 or 2x8, adding a fifth bracket at the mid-point of each long side provides additional support under a full merchandise load.
Why does the bracket suspend the panel 2 inches from the wall?
The 2-inch gap gives hooks, faceouts, and shelf bracket arms the clearance they need to fit behind the panel face without contacting the wall. Without this standoff, the tails of display accessories would press against the wall and the panel couldn't hold them properly. The gap also lets the panel clear baseboards and wall molding in most retail spaces.
What wall types work with Gridwall Hanging Brackets?
The bracket attaches with a single screw at each mounting point. On stud walls, drive the screw directly into the stud for a secure hold. On drywall without a stud behind the bracket position, use a wall anchor rated for the combined weight of the panel and its merchandise load. Concrete or masonry walls need a masonry anchor and an appropriate drill bit. The bracket itself is compatible with any wall type — the fastener choice depends on your wall construction.
Can I hang any size gridwall panel with these brackets?
Yes. Gridwall Hanging Brackets work with all standard gridwall panel sizes — from the 2x4 compact panel up to the 2x8 tall panel — since all panels use the same wire gauge at the corners. For taller panels, consider adding extra brackets along the sides for additional stability under heavy merchandise loads.
What is the difference between black, chrome, white, and raw steel brackets?
All four are the same bracket at the same dimensions. The only difference is the finish. Raw steel is the only uncoated option and is available at an upcharge. Choose the color that matches your panel and wall finish for the cleanest look at the mounting points. Raw steel suits industrial or raw aesthetic retail environments.
